Welcome to our comprehensive guide on Ketron PEEK 1000, a general purpose grade of polyetheretherketone (PEEK) renowned for its exceptional mechanical, thermal, and chemical properties. Whether you’re in the aviation, electronics, medical, electricity, nuclear, or automotive industry, understanding the material properties of Ketron PEEK 1000 is crucial for informed decision-making.
In this data sheet, we provide detailed information about the physical, thermal, and electrical properties of Ketron PEEK 1000, ensuring you have all the necessary specifications at your fingertips. From its density and water absorption to its melting temperature, thermal conductivity, heat deflection temperature, and flammability, you’ll find everything you need to know in one convenient resource.
Whether you’re looking for the ketron peek 1000 data sheet or the ketron peek 1000 datasheet pdf, we’ve got you covered. Keep reading to discover the remarkable properties of Ketron PEEK 1000 that make it a reliable choice for a wide range of applications.
Physical Properties of Ketron PEEK 1000
In this section, we will explore the physical properties of Ketron PEEK 1000, a versatile and high-performance thermoplastic material.
Ketron PEEK 1000 is characterized by its grey to black color and a density of 1.31 g/cm³. Its low water absorption rate of 0.06% to 0.12% makes it suitable for applications where moisture resistance is crucial.
One of the notable physical properties of Ketron PEEK 1000 is its low coefficient of linear thermal expansion, which ranges from 55 x 10-6 to 130 x 10-6 µm/(m·K). This means that the material exhibits minimal dimensional changes when exposed to temperature variations, ensuring dimensional stability in various environments.
The melting temperature of Ketron PEEK 1000 is approximately 340°C, making it a highly heat-resistant material. It can withstand temperatures up to 160°C under load, making it suitable for applications that require endurance in elevated temperature conditions.
In addition, Ketron PEEK 1000 demonstrates good flammability characteristics and is rated V-0 according to UL 94, indicating its excellent resistance to ignition and self-extinguishing properties.
|Grey to black
|0.06% – 0.12%
|Coefficient of Linear Thermal Expansion
|55 x 10-6 – 130 x 10-6 µm/(m·K)
|UL 94 V-0
Thermal Properties of Ketron PEEK 1000
Ketron PEEK 1000 is not only renowned for its exceptional mechanical and chemical properties but also for its remarkable thermal characteristics. Understanding the thermal behavior of this material is crucial for selecting the right applications that require heat resistance and thermal stability.
One of the standout features of Ketron PEEK 1000 is its low thermal conductivity. At 23°C, it exhibits a thermal conductivity of 0.26-0.35 W/(m·K). This property makes it effective in applications where minimizing heat transfer is essential, such as in insulators and electrical components.
Moreover, Ketron PEEK 1000 boasts a high heat deflection temperature of 160°C at a load of 1.8 MPa. This means that even under pressure, it maintains its structural integrity and dimensional stability at elevated temperatures, making it suitable for demanding environments.
When it comes to continuous service temperatures, Ketron PEEK 1000 can withstand up to 250°C in air and an impressive 310°C in non-oxidizing environments. This elevated temperature resistance makes it an excellent choice for applications that often experience high heat exposure, such as aerospace and automotive industries.
The coefficient of linear thermal expansion for Ketron PEEK 1000 ranges from 55 x 10^-6 to 130 x 10^-6 µm/(m·K) in the temperature range of -40°C to 300°C. This property ensures that the material maintains its dimensional stability across a wide range of temperatures, reducing the risk of warping or distortion under thermal fluctuations.
Thermal Properties Summary:
|Thermal Conductivity (23°C)
|Heat Deflection Temperature (1.8 MPa)
|Continuous Service Temperatures
|Coefficient of Linear Thermal Expansion
|55 x 10^-6 to 130 x 10^-6 µm/(m·K) (-40°C to 300°C)
Mechanical Properties of Ketron PEEK 1000
Ketron PEEK 1000 is renowned for its exceptional mechanical properties, making it a top choice for a wide range of applications. With its high tensile strength, impact resistance, compression strength, and more, this material provides impressive performance and reliability.
Tensile Strength and Modulus of Elasticity
The tensile strength of Ketron PEEK 1000 ranges from 100 MPa to 115 MPa, ensuring the material can withstand significant pulling forces without deformation. Additionally, it possesses a tensile modulus of elasticity of 4,300 MPa, indicating its ability to resist stretching and maintain structural integrity even under high stress.
Ketron PEEK 1000 offers excellent impact resistance, demonstrated by its notched impact strength of 8-9 kJ/m². This means it can absorb significant energy without breaking or cracking. In fact, its unnotched impact strength is so high that it does not break, further highlighting its exceptional toughness.
Compression and Shear Strength
When it comes to compression and shear strength, Ketron PEEK 1000 delivers outstanding performance. With a compressive strength ranging from 38 MPa to 140 MPa, it can withstand substantial compressive forces without experiencing deformation or failure. Similarly, it exhibits a shear strength of 75 MPa to 140 MPa, indicating its ability to resist forces applied parallel to its surface.
Flexural Strength and Hardness
Ketron PEEK 1000 possesses a flexural strength of 105 MPa, which denotes its resistance to bending or flexing without fracturing. Additionally, it has a Rockwell M hardness of 115, highlighting its ability to resist indentation or penetration by harder materials.
|Tensile Modulus of Elasticity
|Notched Impact Strength
|Unnotched Impact Strength
|Rockwell M Hardness
Electrical Properties of Ketron PEEK 1000
Ketron PEEK 1000, a high-performance polyetheretherketone (PEEK) material, exhibits exceptional electrical properties, making it an ideal choice for various electrical and electronic applications. Let’s explore the key electrical properties of Ketron PEEK 1000:
- Volume Resistivity: Ketron PEEK 1000 has a volume resistivity greater than 1012 Ohm·cm, indicating its excellent ability to resist the flow of electric current through its volume.
- Surface Resistivity: With a surface resistivity greater than 1013 Ohm/sq, Ketron PEEK 1000 offers a high level of resistance to current flow across its surface.
- Dielectric Constant: The dielectric constant of Ketron PEEK 1000 is 3.2, reflecting its ability to store electrical energy when subjected to an electric field.
- Dissipation Factor: Ketron PEEK 1000 has a low dissipation factor of 0.003, indicating minimal energy loss as heat during the transmission of electrical signals.
- Electric Strength: With a breakdown voltage of 480 volts/mil, Ketron PEEK 1000 shows remarkable resistance to electrical breakdown, ensuring the reliability of electrical components and systems.
These impressive electrical properties of Ketron PEEK 1000 contribute to its suitability for a wide range of electrical and electronic applications, including insulation components, connectors, circuit boards, and electrical housings. Its ability to maintain its electrical performance under various operating conditions makes it a reliable choice for demanding environments.
|Greater than 1012 Ohm·cm
|Greater than 1013 Ohm/sq
|Electric Strength (Breakdown Voltage)
Ketron PEEK 1000, with its exceptional material properties, is an outstanding engineering plastic that caters to a diverse range of applications. Its mechanical, thermal, and electrical properties make it highly suitable for industries such as aviation, electronics, medical, electricity, nuclear, and automotive. The material’s high impact strength, chemical resistance, and flame retardancy provide reliable solutions for demanding environments.
Whether it’s used in aircraft components, semiconductor parts, medical equipment, or automotive components, Ketron PEEK 1000 delivers consistent performance. Its versatility and reliability make it an excellent choice for a wide range of challenging applications.
Investing in Ketron PEEK 1000 material properties ensures exceptional performance, durability, and longevity. By choosing this material for your projects, you gain the advantage of its remarkable mechanical, thermal, and electrical characteristics, resulting in superior products that meet the highest standards.
What is Ketron PEEK 1000?
Ketron PEEK 1000 is a general purpose grade of polyetheretherketone (PEEK) known for its excellent mechanical, thermal, and chemical properties.
What are the physical properties of Ketron PEEK 1000?
Ketron PEEK 1000 has a density of 1.31 g/cm³, low water absorption rate of 0.06% to 0.12%, and a melting temperature of 340°C. It is grey to black in color.
What are the thermal properties of Ketron PEEK 1000?
Ketron PEEK 1000 has a low thermal conductivity of 0.26-0.35 W/(m·K) at 23°C, a high heat deflection temperature of 160°C under a load of 1.8 MPa, and can withstand continuous service temperatures of up to 250°C in air.
What are the mechanical properties of Ketron PEEK 1000?
Ketron PEEK 1000 has a tensile strength of 100-115 MPa, a tensile modulus of elasticity of 4,300 MPa, high impact strength, good compression and shear strength, a flexural strength of 105 MPa, and a Rockwell M hardness of 115.
What are the electrical properties of Ketron PEEK 1000?
Ketron PEEK 1000 has a volume resistivity greater than 10^12 Ohm·cm, a surface resistivity greater than 10^13 Ohm/sq, a dielectric constant of 3.2, and a breakdown voltage of 480 volts/mil.
What industries can benefit from using Ketron PEEK 1000?
Ketron PEEK 1000 is ideal for industries such as aviation, electronics, medical, electricity, nuclear, and automotive due to its excellent properties and reliability in demanding environments.