peek 30 glass filled data sheet

PEEK 30% Glass Filled Data Sheet Specs & Info

Welcome to our comprehensive guide on PEEK 30% Glass Filled. In this article, we will provide you with all the essential information and specifications you need to know about this special modification of PEEK. If you are looking for the peek 30 glass filled properties or the peek 30 glass filled datasheet pdf, you have come to the right place.

PEEK 30% Glass Filled, also known as TECAPEEK GF30 natural, is a material that offers superior mechanical strength, high rigidity, improved creep strength, and dimensional stability compared to unfilled PEEK. It is a popular choice for applications that require high static loads and exposure to elevated temperatures.

This material also boasts excellent chemical resistance and is insoluble in common solvents. It is important to note, however, that PEEK GF30 may not be suitable for bearing or wear applications due to the potential abrasive effect of the glass fibers on mating surfaces.

Furthermore, PEEK GF30 complies with the restrictions imposed by the RoHS Directive 2011/65/EU for electrical equipment.

When it comes to mechanical properties, PEEK 30% Glass Filled is exceptional. It has a tensile strength of 15,000 psi and a tensile modulus of 900,000 psi. The flexural strength is 28,000 psi, with a flexural modulus of 1,000,000 psi. It also exhibits a compressive strength of 26,000 psi and a compressive modulus of 1,000,000 psi. The hardness Rockwell is M103, and the Izod Impact Notched value is 1.4 ft-lb/in.

In terms of thermal properties, PEEK GF30 offers good thermal stability. It has a coefficient of linear thermal expansion of 1.2 x 10^-5 in./in./°F. The heat deflection temperature at 264 psi is 600°F/315°C, with a melting temperature of 644°F/340°C. The maximum operating temperature is 480°F/249°C, and the thermal conductivity is 2.98 BTU-in/ft^2-hr-°F.

PEEK 30% Glass Filled also exhibits favorable electrical properties. It has a dielectric strength of 500 V/mil and a dielectric constant of 3.70 at 1 MHz. The volume resistivity is 5 x 10^16 Ohm-cm at 50% RH.

In conclusion, PEEK 30% Glass Filled, such as TECAPEEK GF30, offers enhanced mechanical properties, high-temperature resistance, excellent chemical resistance, and good electrical properties. It is the ideal material for applications that require strength, rigidity, and dimensional stability in high-temperature environments. However, caution should be exercised in bearing or wear applications due to the potential impact of the glass fiber reinforcement. For more detailed information on the material’s safety and composition, consult the material safety datasheet (MSDS) for PEEK 30% Glass Filled.

PEEK 30% Glass Filled Mechanical Properties

PEEK 30% Glass Filled is a reinforced resin that offers exceptional mechanical properties. The second source provides a comprehensive overview of its specifications:

Property Value
Tensile Strength 15,000 psi
Tensile Modulus 900,000 psi
Tensile Elongation at Break 3%
Flexural Strength 28,000 psi
Flexural Modulus 1,000,000 psi
Compressive Strength 26,000 psi
Compressive Modulus 1,000,000 psi
Hardness Rockwell M103
Izod Impact Notched 1.4 ft-lb/in

peek 30 glass filled mechanical properties

These impressive mechanical properties make PEEK 30% Glass Filled a reliable choice for applications that require strength, rigidity, and dimensional stability. Its high tensile and flexural strength enable it to withstand heavy static loads, offering enhanced durability. The exceptional hardness and impact resistance ensure reliable performance in demanding environments.

PEEK 30% Glass Filled Thermal Properties

PEEK 30% Glass Filled is renowned for its exceptional thermal stability, making it an ideal choice for applications that require resistance to high temperatures. The thermal properties of PEEK 30% Glass Filled, as per the second source, are as follows:

Properties Temperature
Coefficient of Linear Thermal Expansion 1.2 x 10-5 in./in./°F
Heat Deflection Temperature @ 264 psi 600°F/315°C
Melting Temperature 644°F/340°C
Max. Operating Temperature 480°F/249°C
Thermal Conductivity 2.98 BTU-in/ft2-hr-°F

These thermal properties showcase the remarkable ability of PEEK 30% Glass Filled to withstand high temperatures, making it suitable for applications in industries such as aerospace, automotive, and manufacturing. The heat deflection temperature of 600°F/315°C indicates the temperature at which PEEK 30% Glass Filled can still maintain its shape and rigidity under a compressive load of 264 psi. This ensures its reliability and durability in challenging thermal environments. Furthermore, with a low coefficient of linear thermal expansion and excellent thermal conductivity, PEEK 30% Glass Filled demonstrates dimensional stability and efficient heat dissipation properties.

peek 30 glass filled temperature

As shown in the image above, PEEK 30% Glass Filled offers exceptional thermal stability, allowing it to perform reliably in high-temperature applications.

PEEK 30% Glass Filled Electrical Properties

PEEK 30% Glass Filled, also known as TECAPEEK GF30 natural, offers favorable electrical properties that make it suitable for various applications. Here are the key electrical properties of this material:

Property Value
Dielectric Strength 500 V/mil
Dielectric Constant @ 1 MHz 3.70
Dissipation Factor @ 1 MHz N/A
Volume Resistivity 5 x 10^16 Ohm-cm @ 50% RH

PEEK 30% Glass Filled exhibits a high dielectric strength of 500 V/mil, making it suitable for applications that require insulation against high voltages. The dielectric constant of 3.70 at 1 MHz signifies its ability to store electrical energy efficiently. Additionally, the material demonstrates excellent volume resistivity of 5 x 10^16 Ohm-cm at 50% relative humidity, indicating its resistance to electrical conduction.

The electrical properties of PEEK 30% Glass Filled contribute to its overall performance and reliability in electrical and electronic applications. Its ability to withstand high voltages, store electrical energy, and resist electrical conduction makes it a valuable material in various industries.

peek 30 glass filled electrical properties

Conclusion

In conclusion, PEEK 30% Glass Filled, such as TECAPEEK GF30, offers a wide range of benefits for various applications.

With its enhanced mechanical properties, including increased strength and high rigidity, PEEK 30% Glass Filled is a reliable choice for parts exposed to high static loads. Its dimensional stability ensures consistent performance, even in demanding environments.

Additionally, the material boasts excellent chemical resistance, making it suitable for use in applications where exposure to corrosive substances is a concern.

While PEEK 30% Glass Filled is an ideal choice for many applications, it’s important to consider potential abrasive effects on mating surfaces in bearing or wear applications.

For detailed information on the material’s safety and composition, consult the material safety datasheet (MSDS) for PEEK 30% Glass Filled. This resource provides valuable insights into the material’s properties and guidelines for safe handling and usage.

FAQ

What is PEEK 30% Glass Filled?

PEEK 30% Glass Filled is a modified version of PEEK (Polyetheretherketone) that contains 30% glass fiber reinforcement. It offers increased mechanical strength, high rigidity, improved creep strength, and dimensional stability compared to unfilled PEEK.

What are the advantages of PEEK 30% Glass Filled?

PEEK 30% Glass Filled has enhanced mechanical properties, high temperature resistance, excellent chemical resistance, and good electrical properties. It is suitable for use in parts exposed to high static loads and high temperatures.

Is PEEK 30% Glass Filled suitable for bearing or wear applications?

PEEK 30% Glass Filled is less suitable for bearing or wear applications due to the potential abrasive effect of the glass fibers on mating surfaces.

What are the mechanical properties of PEEK 30% Glass Filled?

The mechanical properties include a tensile strength of 15,000 psi, tensile modulus of 900,000 psi, flexural strength of 28,000 psi, and hardness Rockwell of M103, among others.

What are the thermal properties of PEEK 30% Glass Filled?

The thermal properties include a coefficient of linear thermal expansion of 1.2 x 10^-5 in./in./°F, heat deflection temperature at 264 psi of 600°F/315°C, and a melting temperature of 644°F/340°C, among others.

What are the electrical properties of PEEK 30% Glass Filled?

The electrical properties include a dielectric strength of 500 V/mil, dielectric constant at 1 MHz of 3.70, and volume resistivity of 5 x 10^16 Ohm-cm, among others.

Where can I find more information about the safety and composition of PEEK 30% Glass Filled?

For more detailed information, consult the material safety datasheet (MSDS) for PEEK 30% Glass Filled.

Leave a Comment

Your email address will not be published. Required fields are marked *